Envirosafe SF - Food Safe (5L)

£16.00
(excl. of VAT)


Alltec Envirosafe SF - Food Safe is a multi-surface cleaner and sanitiser specially formulated to be safe for use in food preparation areas.  Available in 5 Litres.

 
It will safely clean and protect by removing harmful bacteria, viruses and odours.
 
Suitable for all wet cleanable surfaces.
 
READY TO USE FORMULATION - REDUCES THE RISK OF CONTAMINATION OR OVER-APPLICATION.
  • Biodegradable.
  • Alcohol and bleach free.
  • Fragrance free.
  • Non-flammable.
  • Neutral pH.
  • Suitable for bio-hazard control fogging.
  • Passed and approved to European standards.
  • Anti-bacterial EN1276 Log Kill 6 = 99.9999%.
  • Anti-Viral EN14476 Log Kill 4.33 = 99.99%.
  • Anti-Fungal EN1650 Log Kill 6 = 99.9999%.
 
April 2020 EN14476 Virucidal Test Results:
 
Envirosafe_Lab_Statement

 

Suitable for use in

  • Homes
  • Doctors' Surgeries
  • Care Homes
  • Schools
  • Office Buildings
  • Any Environment Requiring Microbial Control
Fast Acting - Kills Bacteria and Viruses within seconds
However, allowing to dwell, especially on fabrics and fibres ensures product is absorbed and fully effective (do not over wet).
 
Long Lasting Residual Efficacy but with Real World Advice
The antimicrobial effects of Envirosafe can last weeks, however, in high use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.
 
Food Safety
Standard Envirosafe is not food safe - this new Envirosafe SF is!  Ready to use, fragrance free and safe for use in food preparation areas.  However (some real world advice again), European regulations are extremely strict on the levels of disinfectant residue that can come into contact with food, which can easily be exceeded if too much product is applied.  Therefore, we advise that surfaces which will come into direct contact with food are wiped with wet, disposable paper towels prior to food being prepared.  (Interestingly, in the USA a level of 200ppm is safe according to their regulations, but even though we are Brexiting, the UK will still be following European regulations for the forseeable future!)
 
Intructions for Use:

Ready to use.

Hard Surface Cleaning and Sanitising:  Clean surface and ensure free from dirt and debris.  Spray onto surface and allow to dry.  Can be wiped over with a disposable cloth/paper towel.  Suitable for all wet-cleanable surfaces.  May be misted over for added protection.  After application of Envirosafe SF where food is to be prepared, wipe surface with a wet paper towel before direct food contact.

Fogging:  Follow machine instructions.  Can be applied with an 01 jet using your existing spraying equipment.  Check moisture has formed on surfaces to ensure adequate coverage.  Use QAC Test Strips to check adequate application.

 
This product can be used with our QAC Test Strips (see 'Accessories' below) for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately - 200ppm+ is an effective level of sanitiser.
 
Please note that this product is not suitable for use in Hydro-Force inline sprayers or equipment that heats the product.
 
A Safety Data Sheet is available below to download.

Additional product information

Safety Data Sheet Download

Accessories

Product Note Status Price
ATP Meter ATP Meter
£933.00
Ultrasnap ATP Testing Swabs (100) Ultrasnap ATP Testing Swabs (100)
£166.00
QAC Test Strips QAC Test Strips
£9.99
Display accessory details

We also recommend


Customers who bought this product also bought


Browse these categories as well: Alltec, Deodorisers & Sanitisers, Infection Control