Alltec Gel Solve is a powerful solvent gel, ideal for the removal of a wide range of oil based stains such as chewing gum, tar, grease, candle wax, crayon and even polyurethane or epoxy glues.
Directions:
Always pre-test in an inconspicuous area.
Remove stain solids/residue.
Apply gel to stain, gently agitate and allow to dwell for 3-5 minutes.
Blot or scrape off excess gel.
Repeat if necessary.
Thoroughly rinse and extract with clean cold water.
Works very well on candle wax. Excellent product. from Anonymous on 13/01/2017
One of the toughest spots to deal with on a carpet is candle wax. When it is sitting on the top of the fibres, it's not too difficult, however, if the wax has seeped down through the fibre it is time consuming and difficult at times to remove.
A friend called saying that his cat had knocked over a Yankee Candle and there was a lot of wax on the carpet. No problem I replied, knowing from experience that people have a tendency to exaggerate a little. How wrong was I. The wax was over a large area and had seeped down the fibre almost to the backing.
Not one to shy away from a challenge, I continued to clean the area the way I was trained, and By using the Alltec Gel solv I was able to remove the wax completely from the carpet.
I highly recommend this for any carpet cleaning professional. I'll use it again in the near future on another type of carpet soiling and report on how good the results are.
P.S. Off the back of this job I secured another two jobs. Results are virtually guaranteed if you follow the correct procedures.
All incoming ratings are posted by actual shop visitors / webshop customers and their content is checked by the operator by means of a visual inspection.