TileMaster All in One Polished Solvent Sealer

Sorry - Currently out of stock.

TileMaster All in One Polished Sealer (solvent based) is perfect to protect polished natural stone.  Gives excellent protection against both oil and water based stains.  Protects and seals both indoor and outdoor surfaces.  Easy to apply and ready to use.  Available in 1L and 5L.

• Marble
• Limestone
• Travertine
• Granite
• All Polished Stone

• Gives excellent protection against both oil and water based stains.
• Protects and seals both indoor and covered outdoor surfaces.
• Easy to apply and ready-to-use.
• Does not change the appearance of most surface types.
• Aids maintenance and makes it easy to clean the floor.

1. Always pre-test product on small area first.  Allow to cure for 24hrs and check for desired results, colour change and protection level.
2. Check that area is dry, clean and free of all residue and previous treatments.
3. Evenly apply 1 generous coat of sealer to saturate the tile.  The tile should hold a wet or glass like look for about 5 seconds.  Apply more sealer if required to achieve this.
4. After 10 minutes, or before the sealer dries on the surface, remove and buff off any excess sealer using clean and dry white towels or cloths.  To remove stubborn residue, simply reactivate using a clean cloth, slightly wet with sealer.
5. For highly abosrbent stone apply a second coat after 3 hours, using steps 3 and 4 above.
6. The floor is fine for light foot traffic in socks and slippers after 4 hours from final coat.
7. Allow 48 hours before wetting the floor or contact with water or stains.

• High Honed / Semi Polished: 15-20sqm
• Polished Stone: 15-20sqm
• Floor Preservation and Ongoing Maintenance: Surfaces treated with this sealer should be maintained with TileMaster Cleaner No. 1 or No. 2 depending on surface type, diluted at 1:50 (1 cap in 5 litres of water).