Restore Dye Strike helps to lower the pH in carpet cleaning and dyeing.  Removes residues and preps the dye site for re-dyeing.

• Cleaning - Can be used neat for heavily soiled carpets.  Otherwise 60-120ml per 4 Litres.  Agitate if required and rinse with very hot water.
• Dyeing - 4 drops per 250ml of Dye.

Chemspec Energizer is a powdered detergent booster that can be added to alkaline pre-sprays, shampoos, extraction detergents and encap cleaners.  Now available in 2.7Kg.

1. Energizer should be used only with alkaline products. Do not use with acidic products (do not use with Chemspec Optimal Rinse, Chemspec All Fibre Textile Rinse or Chemspec Powdered Cotton Upholstery Cleaner).
2. Energizer is intended for use only as an additive and not as a standalone product.

Craftex Energybrite is an additive for use with carpet, fabric and wall cleaning solutions to boost the cleaning power and brighten light colours.  Energybrite can be used to assist the removal of coffee and tea stains and cellulosic browning stains.   Available in 3Kg.

A Safety Data Sheet and Product Specification Sheet are available to download.

Craftex Extra-Solv is a high powered effective cleaning solvent which can be added to Fabric Dry Cleaner (0038) to aid removal of stubborn dirt, grease and oil based stains.  Can also be used as a pre-spotter on oil, paint, hair dye, cosmetic stains, polishes etc.   Available in 1L.

Prochem Fibrebuff is an acidic powder additive for use in combination with B151 Oxibrite and B105 Fibre Shampoo when removing 'browning' stains or cleaning water damaged carpets. White powder.  Now available in the new size of 1Kg.

Dilution 30 to 60ml per 5 litres. pH 5

Fibre Restore is a Cellulosic Neutraliser/Restorer designed specifically to deal with problems associated with difficult fibres such as cellulosic viscose.  The product will correct stiffening, flattening and hardening.  Available in 5L

• Ready-to-Use.
• Always pre-test in an inconspicuous area.
• If cellulosic fibres (i.e. viscose fibres) have naturally hardened and flattened, spray over the area affected with a fine mist.
• Use a soft Tampico/Upholstery Brush to groom the product in gently, each way, to soften the fabric.
• Set the pile in the correct direction.
• Dry gently with a cool hair dryer or, on larger areas, a DriPod.

One application of Un-Duz-It Unleashed does it all!

• Breakthrough technology from ProRestore Products - no one else has this one-of-a-kind formulation!
• Completely eliminates odours from urine, faeces and wet animal odours.
• Effectively wipes out staining from pet urine.
• Use it on virtually any surface - carpet and upholstery, plus hard porous surfaces (e.g. concrete, wood, plywood, natural stones, grout, quarry tile, bricks etc).
• Water Based.
• pH 9
• Dilutes 1:1 with water or use neat for really severe contamination.

1. Thoroughly saturate affected area, making sure to effectively wet the underlayment, whether wood, concrete or padding.
2. Allow to dwell for 1 hour.  The affected area must stay wet throughout for the urine stain to be completely oxidized.  The longer the dwell time, the better the results.
3. Deep extract using cold or warm tap water.  Depending on air humidity, use a carpet fan to dry the area.

1. Dilute with one part of water (1:1 dilution) and apply as above.  It can also be applied topically with a spray bottle for controlling urine odours.

Alltec Oriental Rug Dye Reducer is designed to reduce fugitive dyes, such as dye bleed, red stains and urine stains.  500g

• Always test area first.
• Mix 10g (1 level teaspoon) in 250ml of boiling water.
• Apply with spotting brush.  Left over solution will not keep and must be mixed and used fresh each time.
• For stains which are not immediately removed, apply steam.
• Avoid contact with metal surfaces as it will cause black staining.