Sorry - currently out of stock.

TileMaster TM Shield Gloss is a low odour, durable, bright shine, polymer dressing suitable for high wear areas.  Designed to give surfaces long lasting protection.  Perfect for use on LVT (Luxury Vinyl Tiles).  5 Litres

• Quick drying - 20 minutes.
• Durable protection to give a long life to the floor surface.
• Traffic scuffs, scratches and heel marks minimized.
• Non-slip finish.

1. Vacuum or sweep the floor area to ensure surface is clear.
2. Ensure the surface is free from oil, grease and old dressing.  If not, clean the areas using TileMaster Cleaner No. 3.
3. Pour TM Shield into the TileMaster Applicator Tray.
4. Load the TM Applicator and apply 1st coat of TM Shield, north to south.
5. Allow TM Shield to dry - around 20-25 minutes.  Time may vary depending on temperature and conditions.
6. Load the TM Applicator and apply 2nd coat, work from an east to west direction.
7. Allow 20-25 minutes in between coats.  Time may vary depending on temperature and conditions.
8. Coverage - 100sqm per 5 Litres.

Sorry - currently out of stock at TileMaster.

TileMaster TM Shield Matt is a low odour, durable, matt finish, polymer dressing suitable for high wear areas.  Designed to give surfaces long lasting protection.  Perfect for use on LVT (Luxury Vinyl Tiles).  5L

TileMaster All in One Water Based Sealer is ideal to seal and protect all natural stone and man-made tiles and gives great stain protection on

• Marble
• Limestone
• Travertine
• Granite
• Highly Absorbent Stone
• Ceramic/Porcelain

• Gives excellent protection against both oil and water based stains.
• Protects and seals both indoor and covered outdoor surfaces.
• Easy to apply and ready-to-use.
• Does not change the appearance of most surface types.
• Aids maintenance and makes it easy to clean the floor.

Coverage (rates per 1 litre per coat):

• High Absorbency Honed Natural Stone: 10-15sqm
• Medium Absorbency Honed Natural Stone: 15-20sqm
• Polished Stone: 15-20sqm
• Polished Porcelain: 40-50sqm
• Ceramic and Porcelain: 35-45sqm
• Floor Preservation and Ongoing Maintenance: Surfaces treated with this sealer should be maintained with TileMaster Cleaner No. 1 or No. 2 depending on surface type, diluted at 1:50 (1 cap in 5 litres of water).

TileMaster Colour Enhancing Sealer (Solvent) is ideal to seal and protect all natural stone whilst deepening the natural colour of the stone and giving great stain protection on:

• Marble
• Limestone
• Travertine
• Granite
• Highly Absorbent Stone
• Ceramic/Porcelain

• Deepens the colour of the stone.
• Gives excellent protection against both oil and water based stains.
• Laboratory certified as safe for food preparation areas and worktops.
• Protects and seals both indoor and covered outdoor surfaces.
• Easy to apply and ready-to-use.
• Does not change the appearance of most surface types.
• Aids maintenance and makes it easy to clean the floor.

Coverage (rates per 1 litre per coat):

• High Absorbency Honed Natural Stone: 10-15sqm
• Medium Absorbency Honed Natural Stone: 15-20sqm
• Polished Stone: 15-20sqm
• Polished Porcelain: 40-50sqm
• Ceramic and Porcelain: 35-45sqm
• Floor Preservation and Ongoing Maintenance: Surfaces treated with this sealer should be maintained with TileMaster Cleaner No. 2, diluted at 1:50 (1 cap in 5 litres of water).

• Gives excellent protection against both oil and water based stains. 
• Protects and seals both indoor and outdoor surfaces. 
• Easy to apply and ready to use.
• Perfect for Porcelain, Marble, Limestone, Slate, Granite, Grout Joints, Sandstone and any tile surface.

• Gives excellent protection against both oil and water based stains.
• Laboratory certified as safe for food preparation areas and worktops.
• Protects and seals both indoor and outdoor surfaces.
• Easy to apply and ready-to-use.
• Does not change the appearance of most surface types.
• Aids maintenance and makes it easy to clean the floor.

1. Always pre-test product on small area first.  Allow to cure for 24hrs and check for desired results, colour change and protection level.
2. Check that area is dry, clean and free of all residue and previous treatments.
3. Evenly apply 1 generous coat of All in ONe CPS sealer to saturate the tile.  The tile should hold a wet or glass like look for about 15 seconds.  Apply more sealer if required.
4. After 10 minutes, or before the sealer dries on the surface, remove and buff off any excess sealer using clean and dry white towels or cloths.  To remove stubborn residue, simply reactivate using a clean cloth, slightly wet with All in One CPS sealer.
5. It is recommended to apply the product to 2-3sqm at a time.

• Stone: 10-20sqm
• Polished Porcelain: 40-60sqm
• Ceramic and Porcelain Grout Sealing: 35-75sqm

Sorry - Currently out of stock.

TileMaster All in One Polished Sealer (solvent based) is perfect to protect polished natural stone.  Gives excellent protection against both oil and water based stains.  Protects and seals both indoor and outdoor surfaces.  Easy to apply and ready to use.  Available in 1L and 5L.

• Marble
• Limestone
• Travertine
• Granite
• All Polished Stone

• Gives excellent protection against both oil and water based stains.
• Protects and seals both indoor and covered outdoor surfaces.
• Easy to apply and ready-to-use.
• Does not change the appearance of most surface types.
• Aids maintenance and makes it easy to clean the floor.

1. Always pre-test product on small area first.  Allow to cure for 24hrs and check for desired results, colour change and protection level.
2. Check that area is dry, clean and free of all residue and previous treatments.
3. Evenly apply 1 generous coat of sealer to saturate the tile.  The tile should hold a wet or glass like look for about 5 seconds.  Apply more sealer if required to achieve this.
4. After 10 minutes, or before the sealer dries on the surface, remove and buff off any excess sealer using clean and dry white towels or cloths.  To remove stubborn residue, simply reactivate using a clean cloth, slightly wet with sealer.
5. For highly abosrbent stone apply a second coat after 3 hours, using steps 3 and 4 above.
6. The floor is fine for light foot traffic in socks and slippers after 4 hours from final coat.
7. Allow 48 hours before wetting the floor or contact with water or stains.

• High Honed / Semi Polished: 15-20sqm
• Polished Stone: 15-20sqm
• Floor Preservation and Ongoing Maintenance: Surfaces treated with this sealer should be maintained with TileMaster Cleaner No. 1 or No. 2 depending on surface type, diluted at 1:50 (1 cap in 5 litres of water).

TileMaster Matt Wax Dressing is an ideal surface sealer to protect natural stone and give a wonderful matt finish.  Available in 1L and 5L. 

• Unpolished Marble & Limestone
• Quarry Tiles
• Granite Tiles
• Any Absorbent Stone.

• Enhances the natural appearance of surface and gives a matt finish.
• Low odour and does not give off unpleasant smells.
• Protects, enhances and maintains tiles in one solution.
• Easy to apply and ready-to-use.
• HIghly resistant.
• Aids maintenance and makes it easier to clean floor.

• Stone & Quarry Tiles: 15-25sqm
• High Absorbent Stone: 8-12sqm
• Floor Preservation and Ongoing Maintenance: Surfaces treated with Matt Wax Dressing, should be maintained with TileMaster Cleaner No. 2, diluted at 1:50 (1 cap in 5 litres of water).  For upkeep, the wax can be diluted with 200ml of water in 1 litre of water and applied to the floor using a mop.  This will revitalise the floor.

TileMaster Satin Wax Dressing is an ideal surface sealer to protect natural stone and give a wonderful satin finish.  Available in 1L and 5L.

• Unpolished Marble & Limestone
• Quarry Tiles
• Granite Tiles
• Any Absorbent Stone

• Enhances the natural appearance of surface and gives a satin shine.
• Low odour and does not give off unpleasant smells.
• Protects, enhances and maintains tiles in one solution.
• Easy to apply and ready-to-use.
• HIghly resistant.
• Aids maintenance and makes it easier to clean floor.

• Stone & Quarry Tiles: 15-25sqm
• High Absorbent Stone: 8-12sqm
• Floor Preservation and Ongoing Maintenance: Surfaces treated with Satin Wax Dressing, should be maintained with TileMaster Cleaner No. 2, diluted at 1:50 (1 cap in 5 litres of water).  For upkeep, the wax can be diluted with 200ml of water in 1 litre of water and applied to the floor using a mop.  This will revitalise the floor.
•  

• Ready-to-use.
• Removes even the deepest grease stains.
• Extremely easy to use.
• Works great on fireplaces, worktops and grout.
• Acts like a liquid poltice.

• Ready-to-use.
• Cleans without damaging the surface.
• Extremely easy to use.
• Removes deep inset stains.
• Works great on fireplaces, worktops and grout.